Available in 2-1/2 and 3-1/2 digit models

Stalker’s new Speed Signs use high-intensity LEDs with no moving parts to break or wear out and are thinner and lighter than their old-generation counterparts. These new Speed Signs do things that the old flip-signs can’t do, such as connecting up to three Speed Signs to a Pro II radar to simultaneously show Pitch, Plate, and Hit speeds.

• Lightweight and durable
• Stable swingout feet
• Folds flat for easy storage
• Hangs with integrated top corner hooks
• Bright, easy-to-read LED digits
• Bluetooth Capable (with purchase of bluetooth adapters)

Stalker LED Speed Signs interface with all Stalker Sport Radar and Jugs Radar Guns through the use of connectors and dedicated cables.

• Stalker ATS II
• Stalker Pro II
• Stalker Sport 2
• Stalker Solo 2
• Stalker Sport
• Stalker Pro
• Jugs Pro-Sports
• Jugs Si Arcade

Product Features

---

The Stalker LED Speed Sign interfaces with sport radar guns through the use of connectors and dedicated cables:

Model	Cable (connector)
Stalker ATS II	155-2284-00
Stalker Pro II	155-2284-00
Stalker Sport 2	155-2287-25
Stalker Solo 2	155-2287-25
Stalker Pro	155-2271-00  - For radars without and RS232 port require a Handle with Data Connector 200-0163-02 155-2287-25 - For radars with RS232 port.*
Stalker Sport	155-2271-00  - For radars without and RS232 port require a Handle with Data Connector 200-0163-02 155-2287-25 - For radars with RS232 port.*
Jugs Pro-Sports	155-2287-25
Jugs Si Arcade	155-2312-20

* Requires a Battery Handle (200-0480-00) or Corded Handle (200-0163-00)

Model:	2½-Digit Speed Sign	3½-Digit Speed Sign
Dimensions:	15.5” (39.4cm) wide 9.5” (24.1cm) high 1.375” (3.5cm) deep	21.5” (54.6cm) wide 9.5” (24.1 cm) high 1.375” (3.5cm) deep
Weight:	6.05 lbs. (2.74kg)	8.05 lbs. (3.65kg)
Digit height:	8.0” (20.3cm)	8.0” (20.3cm)
Input Voltage:	8 to 24 volts (.12 A @12 VDC)	8 to 24 volts (.15 A @12 VDC)

Stalker LED Speed Signs are manufactured in the United States and backed by a full 1-year warranty.

The LED Speed Sign is weather resistant, but should be kept out of heavy rain. The external power supply is not waterproof and should be kept dry at all times

Specifications

---

LED Speed Sign Setup
The Stalker LED Speed Sign features rotating feet that fold parallel to the sign’s case for easy storage. To position the Speed Sign on a flat surface, rotate the feet 90 degrees so that they are perpendicular to the sign’s face. Alternatively, hang the sign using the integral top-corner hooks.

Connecting a Radar and a Sign 
In order for the Speed Sign to properly recognize the particular radar gun model and its data, the unit(s) should be connected in the following manner:

1) connect data cable to radar and sign
2) apply power to sign by connecting the external power supply* 
3) power up radar

* EXTERNAL POWER SUPPLY IS NOT WATERPROOF. KEEP DRY AT ALL TIMES.

Speed Sign Controls 
The Stalker LED Speed Sign’s controls are located on the lower left side of the unit. A momentary push-button switch initiates LED testing sequences in the following modes:

Push 1 – Table Demonstration Mode: Slowcount, full digit flash, slow count, fast count, loop...
Push 2 – Fast count
Push 3 – All LEDs on
Push 4 – Show software version
Push 5 – Enter normal mode

Configuration 
To configure multiple LED Speed Signs using the Stalker Pro II radar, use Speed Sign multiple sign cabling hub, 200-0815-00. Set DIP switches 6, 7, and 8 to their appropriate positions before connecting the radar and signs.